|
|
|
|
|
 |
 년도별 목차보기 |
| * 원문 PDF 파일은 로그인 하시기 바랍니다. |
 |
|
| 발행년도/권호 |
1992 년 / 권호: V.4,no.3,Sept |
| 논문제목1(원어) |
조제 첨가 음이온 발포제의 거품 효율 |
| 논문제목2(타언어) |
Foaming Efficiency of Anion Foaming Agent Solution to Add Dyeing Assistants |
| 저자(원어) |
김공주 (전북대학교 공과대학 섬유공학과) 박병기 (전북대학교 공과대학 섬유공학과) 조은진 (전북대학교 공과대학 섬유공학과) 김지주 (전북대학교 공과대학 섬유공학과) 이재덕 (전북대학교 공과대학 섬유공학과) |
| 저자(타언어) |
|
| 소속(원어) |
김공주 (전북대학교 공과대학 섬유공학과) 박병기 (전북대학교 공과대학 섬유공학과) 조은진 (전북대학교 & |
| 소속(타언어) |
|
| 시작/끝
페이지 |
82 ~ 90 총페이지 : 9 |
| 언어(원어) |
Korean |
| 초록 |
To optimize the foam dyeing procedures for polyester and polyester/nylon blended non-woven fabrics, the effects of organic solvents and surfactants were investigated by measuring the foam heights and surface tensions of the foam dyeing solution. The results of the experiments can be summarized as follows: 1) Organic solvents and surfactants (sodium lauryl sulphate: SLS) solution lower the surface tension (ST) of the water, but ST lowering rate of SLS solution is greater than that of solvents. For a 0.25% SLS solution, the minimum surface tension was 30.3 dyne/cm, which is nearly the same value for organic solvents. 2) For 0.25% SLS solutions, additional adding of a 4.0% organic solvent makes the foam height (FH) be its maximum. 3) At 0.6 g/ι dye concentration, incorporation of 0.4% SLS makes the surface tension of the foam solution be its minimum. The foam height did not show any trend due to the dye type. 4) The effect of foam stabilizers (sodium alginate (Alg-Na) and hydroxy ethyl cellulose (HEC)) were also investigated. The foam height of the foaming solution with HEC was greater than that with Alg-Na. The foam stability of the foaming solution with Alg-Na was better than that with HEC |
| 키워드 |
|
| 학회지 |
|
| Reference |
|
|
 |
 |
 |
|
|
|
|
간행물정보
한국염색가공학회지
