|
|
|
|
|
 |
 년도별 목차보기 |
| * 원문 PDF 파일은 로그인 하시기 바랍니다. |
 |
|
| 발행년도/권호 |
2005 년 / 권호: V.17,no.5,Oct |
| 논문제목1(원어) |
심지융착기의 압착벨트 운동에 대한 연구 |
| 논문제목2(타언어) |
A Study on the Press Belt Motion in the Fusing Press M/C |
| 저자(원어) |
허 유1 ‧ 안성기 ‧ 장승호 |
| 저자(타언어) |
You Huh1, Seong-Gi Ahn and Seung-Ho Jang |
| 소속(원어) |
경희대학교 |
| 소속(타언어) |
Kyunghee University |
| 시작/끝
페이지 |
53 ~ 60 총페이지 : 8 |
| 언어(원어) |
Korean |
| 초록 |
Fusing press m/c is used for heating and pressing the specimens that are fed into between
the two moving belts. Therefore the belt movement, belt temperature, and the pressure between belts
must be kept constant. Especially, the belts should move in a limited operation range. When the belts
run far out of the operation point, the machine has to be stopped, which results in a product defect
because the fusing conditions, e.g., temperature and pressure, change during the transient process time
period. It is important to avoid the belt stopping by maintaining the belt movement in a limited range.
This study reports about the movement of the endless fusing belt in a long-span roller fusing m/c. The
belt position changes as the 1st-order system does; if the roller axes are slanting each other with a certain
angle, the belt running around the two rolls shows a dynamic behavior with the time that deviates fastly
at the beginning from the initial condion and slows down. Then it reaches at a final position. The skewer
the axes, the greater the position change. The inital change rate of the belt becomes large as the skewness
of the axes between the two rollers increases. |
| 키워드 |
fusing press m/c, belt movement, roller axes, slanting angle, 1st-order system |
| 학회지 |
|
| Reference |
http://www.koreascience.or.kr/article/ArticleFullRecord.jsp?cn=OSGGBT_2005_v17n5s84_53 |
|
 |
 |
 |
|
|
|
|
간행물정보
한국염색가공학회지
